(1/2)
Conformity to RoHS Directive
Varistors(SMD)
For High-speed Differential Signal Line
AVF16 Series
A low-voltage varistor applicable in high frequencies has been manufactured by using TDK circuit and material technology.
FEATURES
• Chip size: 1608 (L1.6× W0.8mm), applicable in 2 Line-in 1 (2in1)
differential line.
• 2GHz or more of cutoff frequency in differential mode (Sdd21).
• Superior electrostatic absorption characteristics due to reduction
of varistor voltage.
• Meeting Electrostatic Discharge Test IEC61000-4-2, HBM
(human body model) contact 8kV.
APPLICATIONS
• Protective circuit for high-speed differential signal from static
electricity
• HDMI, USB, IEEE1394, etc.
SHAPES AND DIMENSIONS
RECOMMENDED PC BOARD PATTERNS
0.4
1.6 0.1
0.12typ.
NC∗1
0.25typ.
6
2
1
4
3
NC∗1
Area of solder resist
Dimensions in mm
5
0.5
0.25
Mark∗2
P
P
P=0.5typ.
CIRCUIT DIAGRAM
IN1 GND IN2
Transmission line
0.25 0.1
0.25 0.1
0.25 0.1
NC
NC
Not externally connectable
: Terminal for internal circuit connection
+0.05
–0.12
0.12
OUT1 GND OUT2
0.065
Dimensions in mm
∗1 Do not solder the terminal NC(not connected) with land etc.
∗2 Mark is unrelated to the polarity (directionality) of the terminal.
ELECTRICAL CHARACTERISTICS
Maximum
continuous
voltage
Edc(V)
5.5
Cut-off
Varistor voltage
V1mA
(V)
frequency
[Sdd21]
(GHz)
2 min.
4 min.
Part No.
AVF16C212A000F205
AVF16C225A000F405
12
25
5.5
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
002-03 / 20080929 / e9c11_avf.
|