Advantech Car Video System CPC 2520 User Manual

CPC-2520  
VGA/LCD module for Mini Biscuit PC  
User’s Manual  
 
Product warranty  
Advantech warrants to you, the original purchaser, that each of its  
products will be free from defects in materials and workmanship  
for one year from the date of purchase.  
This warranty does not apply to any products that have been  
repaired or altered by persons other than repair personnel autho-  
rized by Advantech, or which have been subject to misuse, abuse,  
accident or improper installation. Advantech assumes no liability  
under the terms of this warranty as a consequence of such events.  
Because of Advantech high quality-control standards and rigorous  
testing, most of our customers never need to use our repair service.  
If an Advantech product is defective, it will be repaired or re-  
placed at no charge during the warranty period. For out-of-  
warranty repairs, you will be billed according to the cost of  
replacement materials, service time and freight. Please consult  
your dealer for more details. If you think you have a defective  
product, follow these steps:  
1. Collect all the information about the problem encountered.  
(For example, CPU speed, Advantech products used, other  
hardware and software used, etc.) Note anything abnormal and  
list any on- screen messages you get when the problem occurs.  
2. Call your dealer and describe the problem. Please have your  
manual, product, and any helpful information readily available.  
3. If your product is diagnosed as defective, obtain an RMA  
(return merchandize authorization) number from your dealer.  
This allows us to process your return more quickly.  
4. Carefully pack the defective product, a fully-completed Repair  
and Replacement Order Card and a photocopy proof of  
purchase date (such as your sales receipt) in a shippable  
container. A product returned without proof of the purchase  
date is not eligible for warranty service.  
5. Write the RMA number visibly on the outside of the package  
and ship it prepaid to your dealer.  
 
Packing list  
Before installing your board, make sure that the following materi-  
als have been received:  
• 1 CPC-2520 VGA/LCD module for mini biscuit PC  
• 2 floppy disks (or one CD-ROM) including SVGA utility  
programs and drivers for Windows 95/98/NT  
• 1 warranty certificate  
• This user's manual  
If any of these items are missing or damaged, contact your  
distributor or sales representative immediately.  
Technical support and sales assistance  
If you have any technical questions about the CPC-2520 or any  
other Advantech products, please visit our support website at:  
For more information about Advantech's products and sales  
information, please visit:  
 
Contents  
Chapter 1 General Information................................. 1  
1.1 Introduction .................................................................. 2  
1.2 Specifications ................................................................ 3  
General ........................................................................... 3  
Mechanical and environmental ...................................... 3  
1.3 Board layout: dimensions ............................................ 4  
Chapter 2 Installation ................................................ 5  
2.1 Jumpers and connectors .............................................. 6  
2.2 Board layout: jumper/connector locations ................ 7  
2.3 Safety precautions ........................................................ 8  
2.4 Jumper settings ............................................................ 9  
2.5 LCD Panel select (SW1) ............................................ 10  
2.6 Display connectors (CN2, CN3) ................................ 10  
2.7 LCD display connector (CN2)................................... 11  
2.8 VGA display connector (CN3) .................................. 12  
2.9 FPC cable installation ................................................ 14  
Chapter 3 Software Configuration ......................... 15  
3.1 Introduction ................................................................ 16  
3.2 Connections for five standard LCDs ........................ 16  
Connections to Sharp LM64183P, LM64P89  
(640 x 480 DSTN MONO LCD) ............................... 16  
Connections to Toshiba LTM10C042  
(640 x 480 TFT color LCD)....................................... 18  
Connections to Sharp LM64C142  
(640 x 480 DSTN color LCD) ................................... 19  
Connections to Toshiba LTM12C275A  
(800 x 600 TFT color LCD)....................................... 20  
 
Chapter 4 PCI SVGA Setup..................................... 21  
4.1 Introduction ................................................................ 22  
4.1.1 Chipset ................................................................ 22  
4.1.2 Display memory .................................................. 22  
4.1.3 Display types....................................................... 22  
4.2 Installation of SVGA driver ...................................... 23  
4.2.1 Installation for Windows 3.1 .............................. 24  
4.2.2 Installation for Windows 95 ............................... 26  
4.2.3 Installation for Windows NT .............................. 29  
4.3 Further information................................................... 32  
Chapter 5 Board Diagrams ..................................... 33  
5.1 PCB layout: SODIMM/screw hole locations ........... 34  
5.2 Board layout: connectors (top view) ........................ 35  
5.3 FPC/FFC layout: CN2: 50-pin FPC connector ....... 36  
5.4 FPC/FFC cable layout:  
CN3: 12-pin FPC connector ...................................... 36  
5.5 Height limitations: side view ..................................... 37  
5.6 Component suppliers ................................................. 37  
 
Tables  
Table 2-1: Jumpers and connectors .......................................................... 6  
Table 2-2: LCD display connector (CN2)................................................. 11  
Table 2-3: VGA display connector (CN3) ................................................ 12  
Table 2-4: VGA display connector (CN3) ................................................ 13  
Table 3-1: Connections to Sharp LM64183P, LM64P89 ......................... 16  
Table 3-2: Connections to PLANAR EL ................................................... 17  
Table 3-3: Connections to Toshiba LTM10C042 ..................................... 18  
Table 3-4: Connections to Sharp LM64C142 .......................................... 19  
Table 3-5: Connections to Toshiba LTM12C275A .................................. 20  
Table 5-1: Component suppliers.............................................................. 37  
 
1
General Information  
This chapter provides background  
information for the CPC-2520. Sections  
include:  
Card specifications  
Board layout  
 
1.1 Introduction  
The CPC-2520 is an extension VGA/LCD module for the  
CPC-2245 mini biscuit PC. The CPC-2520 uses a C&T 69000  
chipset for its PCI/SVGA controller. It supports many popular  
LCD, EL, and gas plasma flat panel displays and conventional  
analog CRT monitors. The 69000 VGA BIOS supports mono-  
chrome LCD, EL, color TFT and STN LCD flat panel displays. In  
addition, it also supports interlaced and non-interlaced analog  
monitors (color and mono-chrome VGA) in high-resolution modes  
while maintaining complete IBM VGA compatibility. Digital  
monitors (i.e. MDA, CGA, and EGA) are NOT supported.  
Multiple frequency (multi-sync) monitors are handled as if they  
were analog monitors.  
With on-board 2 MB display memory, the VGA controller can  
drive CRT displays or color panel displays with resolutions up to  
1024 x 768 at 64 K colors.  
CRT and panel displays can be used simultaneously. The  
CPC-2520 can be set in one of three configurations: on a CRT, on  
a flat panel display, or on both simultaneously. The system is  
initially set to simultaneous display mode.  
2
CPC-2520 User's Manual  
 
1.2 Specifications  
General  
Flat panel VGA interface  
Chipset: C&T 69000 VGA controller with Windows accelerator  
Display memory: 2 MB SDRAM in built-in chip  
Display output:  
50-pin FPC connector for flat panel interface  
12-pin FPC connector for VGA interface  
Display type: Supports CRT and flat panel (TFT, DSTN, and  
mono) displays. Can display both CRT and flat panel simulta-  
neously  
Resolution: 640 x 480 @ 16 M colors  
800 x 600 @ 16 M colors  
1024 x 768 @ 64 K colors  
Mechanical and environmental  
Power supply voltage: +5 V (4.75 V ~ 5.25 V)  
Max. power requirements: +5 V @ 0.8 A  
Operating temperature: 0 ~ 60° C (32 ~ 140° F)  
Board size: 68 x 100 mm (2.7" x 3.9")  
Weight: 0.05 kg (0.11 lb)  
Chapter 1 General Information  
3
 
1.3 Board layout: dimensions  
4
CPC-2520 User's Manual  
 
2
Installation  
This chapter explains the setup proce-  
dures of CPC-2520 hardware, including  
instructions on setting jumpers andcon-  
necting peripherals, switches andindica-  
tors. Be sure to read all safety precautions  
before you begin the installation proce-  
dure.  
 
2.1 Jumpers and connectors  
On-board connectors link to external devices such as hard disk  
drives, keyboards, or floppy drives, etc. In addition, the board has  
jumpers for configuring your board for specific applications.  
The table below lists the function of each of the board's jumpers  
and connectors. Later sections in this chapter give detailed  
information on each jumper setting, and gives instructions for  
connecting external devices to your card.  
Table 2-1: Jumpers and connectors  
Number  
SW1  
CN1  
CN2  
CN3  
Function  
LCD panel type setting  
Reserved for VGA testing  
LCD display connector  
VGA display connector  
PCI bus  
CN4  
6
CPC-2520 User's Manual  
 
2.2 Board layout: jumper/connector  
locations  
Chapter 2 Installation  
7
 
2.3 Safety precautions  
Warning! Always completely disconnect the power cord  
from your chassis whenever you are working on  
it. Do not make connections while the power is on  
because sensitive electronic components can be  
damaged by the sudden rush of power. Only  
experienced electronics personnel should open  
the PC chassis.  
Caution! Always ground yourself to remove any static  
charge before touching the CPU card. Modern  
electronic devices are very sensitive to static  
electric charges. Use a grounding wrist strap at  
all times. Place all electronic components on a  
static-dissipative surface or in a static-shielded  
bag when they are not in the chassis.  
8
CPC-2520 User's Manual  
 
2.4 Jumper settings  
You configure your card to match the needs of your application by  
setting jumpers. A jumper is the simplest kind of electric switch. It  
consists of two metal pins and a small metal clip (often protected  
by a plastic cover) that slides over the pins to connect them. To  
close a jumper you connect the pins with the clip. To open a  
jumper you remove the clip. Sometimes a jumper will have three  
pins, labeled 1, 2 and 3. In this case you would connect either pins  
1 and 2 or 2 and 3.  
2
1
Open  
Closed  
Closed 2-3  
A pair of needle-nose pliers may be helpful when working with  
jumpers. If you have any doubts about the best hardware configu-  
ration for your application, contact your local distributor or sales  
representatives before you make any changes.  
Chapter 2 Installation  
9
 
2.5 LCD panel select (SW1)  
SW1  
Panel #  
Panel Type  
A
B
C
D
ON  
ON  
ON  
ON  
1024 x 768 DSTN  
1280 x 1024 TFT  
1
2
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
ON  
ON  
ON  
640 x 480 DSTN  
3
OFF  
ON  
ON  
ON  
800 x 600 DST  
4
OFF  
OFF  
OFF  
OFF  
ON  
ON  
640 x 480 Sharp TFT  
5
OFF  
ON  
ON  
ON  
640 x 480 18-bit TFT  
6
OFF  
OFF  
ON  
ON  
1024 x 768 36-bit TFT  
7
OFF  
ON  
ON  
800 x 600 TFT  
8
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
800 x 600 TFT (large BIOS only)  
800 x 600 TFT (large BIOS only)  
800 x 600 DSTN (large BIOS only)  
800 x 600 DSTN (large BIOS only)  
1024 x 768 TFT (large BIOS only)  
1280 x 1024 DSTN (large BIOS only)  
1024 x 600 DSTN (large BIOS only)  
1024 x 600 TFT (large BIOS only)  
9
OFF  
ON  
ON  
ON  
10  
11  
12  
13  
14  
15  
16  
OFF  
OFF  
ON  
ON  
OFF  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
OFF  
OFF  
OFF  
2.6 Display connectors (CN2, CN3)  
The CPC-2520 PCI SVGA interface can drive conventional CRT  
display and is capable of driving a wide range of flat display,  
including electroluminescent (EL), gas plasma, passive LCD, and  
active LCD displays. The card has two connectors to support these  
display, one for CRT VGA monitor and one for flat panel displays.  
10  
CPC-2520 User's Manual  
 
2.7 LCD display connector (CN2)  
LCD display connector on CPC-2520 is a 50-pin FPC connector. The  
CPC-2520 supports up to 36 bits LCD panel.  
Table 2-2: LCD display connector (CN2)  
Pin  
1
2
3
4
5
6
7
8
Signal  
ENAVEE  
LP  
ENAVDD  
FLM  
SHIFT CLK  
SHIFT CLK-  
M
ENABKL  
GND  
P0  
P1  
P2  
P3  
P4  
P5  
P6  
P7  
GND  
P8  
P9  
P10  
Pin  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
Signal  
P15  
P16  
P17  
P18  
P19  
GND  
P20  
P21  
P22  
P23  
P24  
P25  
P26  
P27  
GND  
P28  
P29  
P30  
P31  
P32  
P33  
P34  
P35  
GND  
GND  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
P11  
P12  
P13  
P14  
Note:  
The model number of the CN2 socket is  
IL-FPR-50S-HF (JAE Co., Ltd.)  
Chapter 2 Installation  
11  
 
2.8 VGA display connector (CN3)  
VGA display connector on CPC-2520 is a 12-pin FPC connector,  
these VGA signals can be connected to client's system board  
through a FPC cable. Client can design this cable by referring to  
Cable layout diagram in chapter of design guide.  
Table 2-3: VGA display connector (CN3)  
Pin  
1
Signal  
GND  
2
+5V  
3
+5V  
4
GND  
5
6
7
8
H SYNC  
DDC1  
V SYNC  
DDC0  
BLUE  
RED  
9
10  
11  
12  
GREEN  
GND  
Note:  
The model number of the CN3 socket is  
IL-FPR-12S-HFC (JAE Co., Ltd.)  
12  
CPC-2520 User's Manual  
 
The VGA connector is a 15-pin D-SUB connector. User can follow a  
transfer table to layout these VGA signals to a standard 15-pin  
D-SUB connector.  
5
1
10  
6
15  
11  
Table 2-4: VGA display connector (CN3)  
VGA  
CN3  
VGA  
Pin Signal  
CN3  
Pin Signal  
Pin Signal Pin Signal  
1
2
3
4
5
6
7
8
RED  
10 RED  
9
Vcc  
GND  
N/C  
SDT  
H-SYNC 5  
V-SYNC 7  
2, 3 +V  
GREEN 11 GREEN  
BLUE  
N/C  
GND  
GND  
GND  
GND  
10  
11  
12  
13  
14  
15  
4
-
GND  
-
9
-
BLUE  
-
8
DDC0  
H SYNC  
V SYNC  
DDC1  
1
1
GND  
GND  
12 GND  
12 GND  
SCK  
6
Chapter 2 Installation  
 
13  
2.9 FPC cable installation  
14  
CPC-2520 User's Manual  
 
3
Software Configuration  
This chapter details the software configu-  
ration information. It shows you how to  
configure the card to match your applica-  
tion requirements.  
Sections include:  
Introduction  
Connections for five standard LCDs  
 
3.1 Introduction  
The CPC-2520 VGA BIOS are located in a 128 Kbyte, 32-pin (JEDEC  
spec.) Flash ROM device, designated U1. To set different types of  
LCD panels please choose Panel type from the DIP Switch.  
3.2 Connections for five standard LCDs  
Connections to Sharp LM64183P, LM64P89  
(640 x 480 DSTN MONO LCD)  
Table 3-1: Connections to Sharp LM64183P, LM64P89  
LM64183/64P89  
CPC-2520 CN2  
Pin  
Name  
Pin  
Name  
CN1-1  
CN1-2  
CN1-3  
CN1-4  
CN1-5  
CN1-6  
CN1-7  
CN1-8  
CN1-9  
CN1-10  
CN1-11  
CN1-12  
CN1-13  
CN1-14  
CN1-15  
S
4
2
5
-
FLM  
LP  
CP1  
CP2  
DISP  
VDD  
VSS  
VEE  
DU0  
DU1  
DU2  
DU3  
DL0  
DL1  
DL2  
DL3  
SHIFT CLK  
External power (+5 V)  
External power (+5 V)  
GND  
-
18,31,40  
-
External power*  
13  
12  
11  
10  
17  
16  
15  
14  
P3  
P2  
P1  
P0  
P7  
P6  
P5  
P4  
* LM64183P -17 V  
* LM64P89 -20 V  
16  
CPC-2520 User's Manual  
 
Connections to PLANAR EL (640 x 480 AD4 EL)  
Table 3-2: Connections to PLANAR EL  
PLANAR 640 x 480 AD4  
CPC-2520 CN2  
Pin  
1
2
3
4
5
6
7
Name  
GND  
DO  
GND  
D1  
GND  
D2  
NC  
Pin  
9
Name  
GND  
P12  
GND  
P13  
GND  
P14  
-
23  
9
24  
18  
25  
-
8
9
D3  
NC  
26  
-
P15  
-
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31,32  
33  
34  
D4  
NC  
D5  
NC  
D6  
GND  
D7  
GND  
VCLK  
GND  
/BLANK  
GND  
HS  
NC  
VS  
NC  
SELFTST  
COLMAP  
ENABLE  
RESERVED  
/LOWPOW  
NC  
19  
-
20  
-
21  
18  
22  
31  
6
31  
-
40  
7
-
4
P8  
-
P9  
-
P10  
GND  
P11  
GND  
SHIFT CLK-  
GND  
-
GND  
M
-
FLM  
-
GND  
GND  
-
-
-
-
-
-
-
40  
49  
-
-
-
-
-
-
RESERVED  
NC  
Chapter 3 Software Configuration  
 
17  
Connections to Toshiba LTM10C042  
(640 x 480 TFT color LCD)  
Table 3-3: Connections to Toshiba LTM10C042  
LTM10C042  
CPC-2520 CN2  
Pin  
1
2
3
Name  
Pin  
9
5
9
Name  
GND  
SHIFT CLK  
GND  
P18  
GND  
CLK  
GND  
R0  
4
29  
30  
32  
18  
33  
34  
35  
18  
21  
22  
23  
31  
24  
25  
26  
31  
7
40  
12  
13  
14  
40  
15  
16  
17  
49  
-
5
6
7
8
R1  
R2  
GND  
R3  
R4  
R5  
GND  
G0  
G1  
G2  
P19  
P20  
GND  
P21  
P22  
P23  
GND  
P10  
P11  
P12  
GND  
P13  
P14  
P15  
GND  
M
GND  
P2  
P3  
P4  
GND  
P5  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
GND  
G3  
G4  
G5  
GND  
ENAB  
GND  
B0  
B1  
B2  
GND  
B3  
B4  
B5  
GND  
VDD  
P6  
P7  
GND  
External power  
External power  
31, 32 VDD  
-
18  
CPC-2520 User's Manual  
 
Connections to Sharp LM64C142  
(640 x 480 DSTN color LCD)  
Table 3-4: Connections to Sharp LM64C142  
LM64C142  
Pin  
CPC-2520 CN2  
Name  
YD  
Pin  
Name  
CN1-1  
CN1-2  
CN1-3  
CN1-4  
CN1-5  
CN1-6  
CN1-7  
CN1-8  
CN1-9  
CN1-10  
CN1-11  
CN1-12  
CN1-13  
CN1-14  
CN1-15  
CN2-1  
CN2-2  
CN2-3  
CN2-4  
CN2-5  
CN2-6  
CN2-7  
CN2-8  
CN2-9  
CN2-10  
4
FLM  
LP  
2
5
-
-
9
-
LP  
XCX  
DISP  
VDD  
VSS  
VEE  
DU0  
DU1  
DU2  
DU3  
DU4  
DU5  
DU6  
DU7  
VSS  
DL0  
DL1  
DL2  
DL3  
DL4  
DL5  
DL6  
DL7  
VSS  
SHIFT CLK  
External power (+5 V)  
External power (+5 V)  
GND  
External power  
22  
21  
20  
19  
13  
12  
11  
10  
18  
26  
25  
24  
23  
17  
16  
15  
14  
31  
P11  
P10  
P9  
P8  
P3  
P2  
P1  
P0  
GND  
P15  
P14  
P13  
P12  
P7  
P6  
P5  
P4  
GND  
Chapter 3 Software Configuration  
 
19  
Connections to Toshiba LTM12C275A  
(800 x 600 TFT color LCD)  
Table 3-5: Connections to Toshiba LTM12C275A  
LTM12C275A  
CPC-2520 CN2  
Pin  
1
2
3
Name  
GND  
NCLK  
NC  
Pin  
9
5
-
Name  
GND  
SHIFT CLK  
NC  
4
NC  
-
NC  
5
6
GND  
R0  
9
GND  
P18  
29  
30  
32  
33  
34  
35  
18  
21  
22  
23  
24  
25  
26  
31  
12  
13  
14  
15  
16  
17  
7
7
8
9
R1  
R2  
R3  
R4  
R5  
GND  
G0  
G1  
G2  
G3  
G4  
G5  
GND  
B0  
B1  
B2  
B3  
B4  
P19  
P20  
P21  
P22  
P23  
GND  
P10  
P11  
P12  
P13  
P14  
P15  
GND  
P2  
P3  
P4  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
P5  
P6  
P7  
M
B5  
ENAB  
GND  
VCC  
VCC  
GND  
40  
-
-
GND  
External power (+5 V)  
External power (+5 V)  
GND  
49  
20  
CPC-2520 User's Manual  
 
4
PCI SVGA Setup  
Introduction  
Installation of SVGA driver for  
- Windows 3.1  
- Windows 95  
- Windows NT  
Further information  
 
4.1 Introduction  
The CPC-2520 has an on-board PCI flat panel/VGA interface. The  
specifications and features are described as follows:  
4.1.1 Chipset  
The CPC-2520 uses a C&T 69000/69030 chipset for its  
PCI/SVGA controller. It supports many popular LCD, EL, and gas  
plasma flat panel displays and conventional analog CRT monitors.  
The 69000/69030 VGA BIOS supports monochrome LCD, EL,  
color TFT and STN LCD flat panel displays. In addition, it also  
supports interlaced and non-interlaced analog monitors (color and  
mono-chrome VGA) in high-resolution modes while maintaining  
complete IBM VGA compatibility. Digital monitors (i.e. MDA,  
CGA, and EGA) are NOT supported. Multiple frequency (multi-  
sync) monitors are handled as if they were analog monitors.  
4.1.2 Display memory  
With on-board 2 MB display memory, the VGA controller can  
drive CRT displays or color panel displays with resolutions up to  
1024 x 768 at 64 K colors. The display memory can be expanded  
to 4 MB for true-color resolution of 1024 x 768 with C&T 69030.  
4.1.3 Display types  
CRT and panel displays can be used simultaneously. The  
CPC-2520 can be set in one of three configurations: on a CRT, on  
a flat panel display, or on both simultaneously. The system is  
initially set to simultaneous display mode. The utility disks  
includes three *.COM files in the subdirectory Utility\vga\ which  
can be used to configure the display. In order to use these configu-  
ration programs, type the file name and path at the DOS prompt.  
CT.COM: Enables CRT display only  
FP.COM: Enables panel display only  
SM.COM:Enables both displays simultaneously  
22  
CPC-2520 User's Manual  
 
4.2 Installation of SVGA driver  
Complete the following steps to install the SVGA driver. Follow  
the procedures in the flow chart that apply to the operating system  
that you are using within your CPC-2520.  
Important: The following windows illustrations are examples  
only. You must follow the flow chart instructions  
and pay attention to the instructions which then  
appear on your screen.  
Note:  
<Enter> means pressing the "Enter" key on the  
keyboard.  
Chapter 4 Award BIOS Setup  
23  
 
4.2.1 Installation for Windows 3.1  
a. Insert the utility  
disk into the  
floppy disk drive.  
D:\VGA\Win31\Setup.exe  
Select "File" in  
b.  
1.  
2.  
Program Manager.  
c. Click "Run" and  
type: "A:\VGA\  
Win31\Setup.exe".  
a. Choose the  
language you want  
to use during  
installation.  
a. Select the  
highlighted item.  
b. Press "ENTER".  
3.  
4.  
a. Press "ENTER" to  
install all  
resolutions.  
24  
CPC-2520 User's Manual  
 
a. Type the path of  
the operating  
system.  
5.  
6.  
7.  
a. When installation  
is completed,  
reboot the system.  
b. You will see the  
"ChipsCPL" icon in  
the control panel.  
ChipsCPL  
a. Double click  
"ChipsCPL".  
b. Adjust screen size,  
color and refresh  
rate to your  
preferences.  
END  
Chapter 4 Award BIOS Setup  
25  
 
4.2.2 Installation for Windows 95  
a. Select "Start",  
"Settings",  
"Control Panel",  
"Display",  
"Settings".  
1.  
2.  
b. Press "Advanced  
Properties".  
a. Choose the  
"Adapter" label.  
b. Press the  
"Change..."  
button.  
a. Press the "Have  
Disk" button.  
3.  
4.  
a. Insert the utility  
disk into the  
floppy disk drive.  
b. Type "A:\VGA\  
Win95\Setup\exe".  
c. Press "OK".  
D:\VGA\Win95\  
26  
CPC-2520 User's Manual  
 
a. Select the  
highlighted item.  
b. Click the "OK"  
button.  
69000  
5.  
a. C&T69000/69030  
appears in the  
adapter label.  
b. Click the "Apply"  
button.  
6.  
7.  
a. Press "Yes" to  
reboot.  
a. Repeat Step 1 on  
the previous page  
of this manual.  
The "CHIPS"  
8.  
label appears in  
"Display".  
b. Adjust resolution  
and color.  
Chapter 4 Award BIOS Setup  
27  
 
a. Click the "CHIPS"  
label.  
b. Adjust the refresh  
rate and display
type.  
9.  
c. Press "OK" to  
exit.  
a. Press "Yes" to  
set the monitor  
type.  
10.  
11.  
12.  
a. Select  
"Standard",  
"Super VGA 800  
x 600", or "XGA".  
b. Press the "OK"  
button.  
a. Choose "Restart"  
to reboot.  
END  
28  
CPC-2520 User's Manual  
 
4.2.3 Installation for Windows NT  
a. Select "Start", "Settings",  
"Control Panel".  
b. Double click the "Display"  
icon.  
1.  
2.  
a. Choose the "Settings" label.  
b. Press the "Display Type"  
button.  
a. Press the "Change..." button.  
3.  
4.  
a. Click the "Have Disk..."  
button.  
Chapter 4 Award BIOS Setup  
 
29  
a. Insert the utility disc into  
the floppy disk drive.  
b. Type "A:\VGA\NT40\" in  
the blank.  
5.  
c. Press the "OK" button.  
D:\VGA\NT40\  
a. Select the highlighted  
item.  
b. Press the "OK" button.  
6.  
7.  
8.  
a. Press "Yes" to proceed.  
a. Press "OK" to reboot.  
30  
CPC-2520 User's Manual  
 
a. Repeat Step 1 in this  
manual, to select the  
"Settings" label.  
b. Adjust resolution and color.  
c. Click "Test" to see the  
result.  
9.  
d. Click "OK" to save the  
settings.  
END  
Chapter 4 Award BIOS Setup  
 
31  
4.3 Further information  
For further information about PCI/SVGA installation in your  
CPC-2520, including driver updates, troubleshooting guides and  
FAQ lists, visit the following web resources:  
C&T website: www.chips.com  
Advantech websites: www.advantech.com  
support.advantech.com.tw  
Confirm Password:  
32  
CPC-2520 User's Manual  
 
5
Board Diagrams  
This chapter contains diagrams of the  
CPC-2245/CPC-2520 carrier boards It  
includes the FPC cable, SODIMM socket,  
and mechanical diagrams.  
 
5.1 PCB layout: SODIMM/screw hole  
locations  
34  
CPC-2520 User's Manual  
 
5.2 Board layout: connectors (top view)  
Top view  
Chapter 5 Board Diagrams  
35  
 
5.3 FPC/FFC layout:  
CN2: 50-pin FPC connector  
5.4 FPC/FFC cable layout:  
CN3: 12-pin FPC connector  
36  
CPC-2520 User's Manual  
 
5.5 Height limitations: side view  
At least 3 mm clearance is needed between the carrier board's  
surface and the bottom of the CPC-2245. Some suggested suppli-  
ers are listed below.  
5.6 Component suppliers  
Table 5-1: Component suppliers  
Location  
Model number  
IL-FPR-50S-HF  
IL-FPR-12S-HF  
Supplier  
JAE  
JAE  
CN2 50-pin FPC connector  
CN3 12-pin FPC connector  
CN4 50-pin FPC connector  
145077050112861 ELCO  
Chapter 5 Board Diagrams  
37  
 
38  
CPC-2520 User's Manual  
 

Accusplit Fitness Electronics AH120M9 User Manual
Aiphone Intercom System ts 6k User Manual
Airlink Network Card AGIGA32PCI User Manual
Allied Telesis Switch 8648T 2SP User Manual
Altec Lansing Food Processor 4948A User Manual
Amana Range W10330187C User Manual
American Audio DJ Equipment Q SPAND User Manual
American Standard Indoor Furnishings T203700 User Manual
ATI Technologies Computer Hardware X1550 SERIES User Manual
Behringer DJ Equipment DDM4000 User Manual